IBM QLogic 10GBase-SR SFP+ Optical Transceiver 49Y4218 Transceive

Product Features: Interface Converter Module Type: XFP

Axiom Memory Axiom - Transceiver module - SFP - Gigabit EN - 1000

The Axiom 1000BASE-LX/LH SFP operates on standard single-mode fiber-optic link spans of up to 10 km and up to 550m on any multimode fibers. This SFP supports Digital Optical Monitoring (DOM) that allows the end user to monitor real-time performance.

Transition Networks (CGFEB1015-120) (CGFEB1015-120) Transceiver

This Transition Networks dual-slot PointSystem chassis is designed for installation of two selectable Transition Networks PointSystem media converter slide-in-modules.

Tripp Lite N784-001-ST UTP to Fiber Media Converter - tripp-lite-

Cabling: Network, USB

Transition Networks Just Convert-IT™ J/E-CX-TBT-02 (J/E-CX-TBT-

Supports up to 24 devices daisy chained on one coax segment per twisted pair segment. BNC T-connector included for daisy chain applications. MDI/MDI-X switch allows converter to be connected to either a workstation NIC or hub or switches and routers without changing the cable type.

Atlona AT-LINE-PRO2 (ATLINEPRO2) Transceiver

The Atlona AT-LINE-PRO2 is a great additional to your home-theater system. AT-LINE-PRO2 behaves as a switcher, and a HDTV scaler. This unit is able to output multiple resolutions which allows you to match native resolution on your TV or Projector. Analog audio from any of the sources will be digitized and encrypted in to the HDMI output, using one cable for audio and video. You would also have the ability of splitting your source audio to a digital coaxial (S/PDIF) output, and routing it though an audio receiver.

IBM 45W0500 Transceiver

Product Features: Data Transfer Rate: 8480 Mbps; Cabling Type: Fibre Channel; Interface Converter Module Type: SFP (Mini GBIC); Weight: 6.61 lb.; Package Qty.: 1

Transition Networks Transition Ethernet Media Converter (E-100BTX

Transition Networks' 100BASE-TX to 100BASE-FX Media Converter is available in both stand-alone and slide-in-module form factors; making cost-effective integration of twisted pair and fiber optics in Fast Ethernet networks easier than ever before.??The Media Converter operates under heavy traffic loads without excess heat so there is no need for a failure-prone internal fan. It automatically detects and reports loss of link on a connection using Link Pass Through. This feature allows the equipment at the remote end of a link failure to "see" this failure and respond with corrective actions, such as Spanning Tree fail-over links, proprietary trunking links, or failure reports through SNMP or RMON procedures built into the switch, router or hub. The Media Converter also automatically detects faults in a link using Far End Fault. This feature of the Fast Ethernet Fiber standard allows you to troubleshoot a fault, even if it is only in one direction; alerting the device on the same side...