View:
Results 1 - 24 of about 785
Networking Repeaters

Click for more info

Wi-Ex YX230PCSCEL zBoost Dual Band Cell Phone Signal Booster for



Compare
Click for more info

PREMIERTEK (PL-2301A) (PL2301A) Repeater



POWERLINK Amplus is an indoor solution 1W bi-directional Booster designed for 2.4GHz wireless LANs. This unit comes with an easy plug-and-play installation, which works together with an indoor Wireless Access Point to improve its operation range and performance. POWERLINK Amplus is ideal for use with 2.4 GHz frequency hopping or direct sequence spread spectrum radio modems and 802.11b/g devices. POWERLINK Amplus increases range by providing transmit gain as well as low-noise receive gain. This receive gain increases the receive sensitivity of wireless LAN Access Point. Full output power of 1W is achieved with only 5mW input into the Booster.
Compare
Click for more info

Black Box Local Repeater (LE605A-R3)



Black Box repeaters regenerate and retime data packets so you can extend the distance of your Ethernet network and you'll never have to worry about data integrity or network performance.??Easy to install, each repeater includes its own internal autosensing power supply. Just plug in the repeater and the power supply automatically adjusts to any power source with AC voltage from 90 to 260 V AC and power input frequencies between 63 and 47 Hz. Each repeater includes port connections, so you can connect two Ethernet segments - each segment conforms to IEEE 802.3 specifications for length and number of nodes. You can also monitor network and network-segment activity at a glance with the frontpanel LEDs.
Compare
Click for more info

NetGear WN2000RPT (WN2000RPT100NAS) Repeater



The NetGear WN2000RPT100NAS Universal Wifi Range Extender helps improve coverage to eliminate dead zones.
Compare
Click for more info

3Com (3C1207-6) Repeater



Repeater modules provide all the standard functions within an 802.3 Repeater. Frames are regenerated and retimed, allowing them to be transmitted further than the maximum length of a single cable segment. Fragment extension extends undersized collision fragments so that they can be detected by devices throughout the network. Jabber lock-up protection prevents transceivers attached to the MSH from locking up in the case of devices jabbering (jabbering is the uncontrolled transmission of oversized frames to the network). ??Modules provide protection from faults such as cable breaks and faulty connectors, which would halt all network communication. In these circumstances, the segment in which the fault occurs is isolated by partitioning it from the rest of the network after 32 collisions.??Modules can be isolated from the backplane and therefore all other modules in the MSH chassis via a configurable jumper. In Isolation mode, a module acts as a repeater for only the segments attached...
Compare
Click for more info

D-Link DAP-1360 IEEE 802.11n (draft) Wireless Access Point - DAP-



The D-Link DAP-1360 access point is a draft 802.11n compliant device that delivers up to 14x faster speeds and 6x farther range than 802.11g while staying backward compatible with 802.11g and 802.11b devices.
Compare
Click for more info

Gefen (FW-141) Repeater



The FireWire Repeater 400 from Gefen is a repeater that allows you to increase the distance between your computer and a FireWire device by up to 33' (10 m). With one repeater, you can place a device up to 66' (20 m) from a computer. Repeaters can be daisy-chained for distances of up to 250' (76 m). The repeater is powered by a 6-Pin FireWire-400 port on your computer, although an optional AC adapter can be connected when a computer cannot provide enough power.
$71 - $71
at 2 Stores
Compare
Click for more info

Hawking HOW2R1 Hi-Gain Outdoor Wireless-300N Dual Radio Smart Rep



The Hi-Gain Outdoor 2.4GHz Wireless-300N Dual Radio Smart Repeater is an advanced Wi-Fi connectivity solution that receives and rebroadcasts your Wireless 802.11b/g/n network, inside or outside of your home or office.
Compare
Click for more info

Citel EXTender™ 4000 (E4000PRNM) Repeater



Product Features: Remote Management Protocol: Telnet; Cabling Type: RJ-11, RJ-45, Serial RS-232; Connectivity: Wired; Depth: 5.35 in.; Height: 1.35 in.; Width: 6.3 in.; Weight: 0.6 lb.; Warranty: 1 Year
Compare
Click for more info

Linksys Wireless-G WRE54G (WRE54G-UK) Repeater



Expand the range of your wireless network! The Linksys Wireless-G Range Expander is the easy way to increase the effective coverage of your wireless network. Unlike adding a traditional access point to your network to expand wireless coverage, the Wireless-G Range Expander does not need to be connected to the network by a data cable. Just put it within range of your main access point or wireless router, and it bounces the signals out to remote wireless devices.
Compare
Click for more info

Wilson Signalboost Dual Band Universal Connection Amplifier (8112



Signalboost Cellular/PCS Amplifier Plug-and-Play Kit improves signals on both Cellular (824-894 MHz) and PCS (1850-1990 MHz) bands and works with Verizon US Cellular Cellular One Alltel Bell Canada Telus Cingular Sprint T-Mobile and all other Cellular and PCS carriers. No phone adapter required. Connects to all phones!. Works on all generations of CDMA TDMA and GSM. Up to 3 watts maximum power. Power control logic ensures maximum output power is within cellular standards. FCC and IC type accepted. US and foreign Patents Pending.
Compare
Click for more info

T-Mobile Micro USB Battery Boost (SUPA33060) Repeater



Compare
Click for more info

Liftmaster Phantom Repeater Module MODEL PHNRPT



Compare
Click for more info

Cisco (15454-OPT-BST=) Repeater



Optical amplifiers are used in amplified nodes such as hub nodes, amplified OADM nodes, and line amplifier nodes. There are two forms of amplifiers, the Optical Preamplifier (OPT-PRE) and the Optical Booster (OPT-BST) amplifier. The optical amplifier card architecture includes an optical plug-in module with a controller that manages optical power, laser current, and temperature control loops. The amplifier also manages communication with the TCC2 and OAM&P functions such as provisioning, controls, and alarms.??Optical amplifiers have a linear power feature that enables them to be kept in the constant gain mode. The OPT-BST gain range is 5 to 20 dB in constant gain mode and output power mode. In constant power mode, automatic power control (APC) requirements change. This is because span loss degradation does not effect the system and amplifiers are not able to automatically modify the output power for variations in the number of channels when provisioning changes and a failure occurs.
Compare
Click for more info

Hawking Technologies Hawking Hi-Gain Wireless N Mini Range Extend



Compare
Click for more info

Wilson Electronics (801241) Repeater



Wilson's SignalBoost Mobile Professional improves cell phone and data card performance on the road, in airports, hotels and office buildings. The Mobile Professional is available in four plug-and-play kits to meet specific user needs.
Compare
Click for more info

IBM (00N7293) Repeater



Product Features: Cabling Type: SCSI; Connectivity: Wired
Compare
Click for more info

Amped Wireless SR10000 High Power Wireless-N 600mW Smart Repeater



Enjoy extended Internet access in your house with the Amped Wireless SR10000 High Power Wireless-N Range Extender.
Compare
Click for more info

Altronix POE REPEATER EXTENDS ETHERNET & POE (Power Over Ethernet



Compare
Click for more info

Wi-Ex® zBoost YX540 Metro Cell Phone Signal Booster



Designed for consumers, in single story urban dwellings, the zBoost METRO dual band boosts indoor signal for all phones and mobile devices (except Nextel phones) and all US carriers using 800 and 1900 Mhz. The zBoost METRO for the Home or Office extends an indoor Cell Zone up to 1500 sq ft. and doesn't require an outside antenna placement. The package includes everything you need: amplifier base unit, power supply, base unit antenna, coaxial cable (RG59-mini), signal antenna and mounting hardware. The wide radio wave beam width directional antenna receives signals from multiple cell towers.Package Contents:zBoost YX540 Cellular Phone Signal Booster Power supply Base unit antenna Coaxial cable (RG59-mini) Signal antenna Mounting hardware Wi-Ex zBoost YX540 Cellular Phone Signal Booster is one of many Cell Phone Signal Boosters available through Office Depot. Made by Wi-Ex.
Compare
Click for more info

Cisco Linksys 10 Pack Wireless-G Range Expander - WRE54G-RM / WRE



Compare
Click for more info

Spyder Digital Research Powershadow I4x Battery Extende



Your daring avian attack on those egg-stealing pigs is about to oink out. Or that crucial phone interview may be rudely cut short. Just plug in the PowerShadow i4X. Then you can carry on and rescue the eggs, or maybe even your career. The i4X will recharge your iPhone or iPod while you use it. When you're done, simply disconnect and drop the i4X in your pocket. The PowerShadow i4X provides the power you need without the wait.
Compare
Click for more info

Black Box CityLAN 100 (LCL163A) Repeater



Extend your multimode FDDI interface up to 60 kilometers (that's over 35 miles!) over single-mode cable. Extend your connection across your campus or even across a city. CityLAN 100 provides the reliability you need - even at high data rates. Dual counter-rotating architecture provides Automatic Loopback if a path fails. Read local status information at a glance on front-panel LEDs. Use the RS-232 management port for out-of-band management via a VT100 terminal. Break-condition propagation reports line problems to the repeater for management purposes.
Compare
Click for more info
Netgear Universal Wi-Fi Range Extender (WN3000RP) (WN3000RP-100NA

The Universal Wi-Fi Range Extender from Netgear® extends the operating distance of your entire wireless network and conveniently avoids additional need for power cables or device clutter on your office desk or home theater. Also, the WN3000RP extends your wireless network to include the area outside the range of your existing wireless router. It overcomes the obstacles and enhances overall network signal quality, giving you the freedom to roam anywhere in the house and access Internet without worrying about coverage. Plus, its Link-rate LED locates an ideal placement spot to provide optimal wireless coverage. This Plug-and-Play extender is specifically designed to be plugged into an electrical outlet, and blends in nicely with any surrounding. Additionally, it is compatible with wireless b/g/n routers, gateways and Internet service provider devices. Furthermore, the Push ‘N’ Connect using Wi-Fi Protected Setup® (WPS) connects computers and/or routers to the Extender quickly and securely.var wcCpi="A5183482";