Onkyo M-282 2-Channel Amplifier

Ideal for THX Surround EX and multiroom/multichannel systems, the M-282 has got to be the best upgrade value in the home-theater world. Everything you need in an additional amp is here, including Onkyo's WRAT to maximize signal accuracy.

Russound R1250MC 12-Channel Amplifier

The Russound R1250MC is a 12-channel power amplifier ideal for use as the main amplifier in home theater and distributed audio systems. The 12 channels are arranged in pairs to provide amplification for six stereo zones. The R1250MC provides an array of useful features such as bridged mono operation, independent zone triggering, bus inputs and multiple speaker outputs per zone to meet a wide variety of applications and configurations.

Pyle PVA2 Amplifier

Product Features: RMS Power at 4 Ohms: 24 W; RMS Power at 8 Ohms: 12 W; Frequency Response: 20 Hz - 20 kHz; THD (Total Harmonic Distortion): 0.3 %; Audio SNR: 77 dB

Pyle PCM60A Amplifier

Product Features: Depth: 10.51 in.; Height: 3.46 in.; Width: 16.93 in.; Warranty: 1 Year

Channel Vision A1260 2-Channel Amplifier

CHANNEL VISION A1260 Multi Zone Audio Amplifier

Cerwin Vega CV 1800 2-Channel Amplifier

Cerwin Vega's CV Series power amps have the muscle to accommodate the most demanding audio challenge. With power ratings up to 1800 watts, support for bridged mono operation in all three models, and exceptional THD (Total Harmonic Distortion) and Signal-to-Noise ratings, the CV Series power amps are the right choice for myriad musical tasks.

Pyle PTA1 Amplifier

Compact and portable, the Pyle Home PTA1 is ideal for connecting line sources like a CD/DVD or MP3 player directly to a set of speakers. On the front of the unit are the microphone input and volume, master volume and balance controls, and input selector knob. On the rear are two sets of L/R RCA female input connections, and push terminal speaker connections.

Pyle PCAU11 2-Channel Amplifier

Product Features: Number Of Channels: 2; No. of Speaker Outputs: 4 Speakers; RMS Power at 4 Ohms: 15 W; THD (Total Harmonic Distortion): 10 %; Depth: 4.21 in.; Height: 2.17 in.; Width: 5.61 in.; Weight: 2.45 lb.

Pyle PCA2 2-Channel Amplifier

The Pyle Home PCA2's small size makes it ideal for connecting smaller devices like portable CD/DVD or MP3 players directly to a pair of speakers. While it only has RCA-style outputs, it does include a 3.5-millimeter-to-RCA jack adapter for use with a whole range of portable devices. It features an on/off indicator LED, and controls for bass, treble, and volume.

Yamaha A-S500 Amplifier

Product Features: Remote Control: With Remote Control

Channel Vision C-0310 Amplifier

Product Features: Frequency Response: 45 Hz - 1 kHz; Depth: 1.75 in.; Height: 2.5 in.; Width: 6.38 in.

Peavey PV-2600 2-Channel Amplifier

Massive power in a small package. The PV® 2600 has XLR, 1/4 inch and barrier strip inputs with Peavey's famous DDT™ compression system, binding post and Speakon® output connectors.

Technical Pro IA25U Amplifier

What if there was an iAmplifier, what would it do? The IA25U Integrated Amplifier by Technical Pro features inputs for USB and SD Memory cards. So not only can you connect it with your loudspeakers, but it also plays MP3s. But this is still an amplifier with 600 Watts peak power, bass, treble, and balance controls. -Specifications: -600 watts peak power -Inputs: RCA (2 Audio sources), USB, SD Card, MP3 -Outputs: Push Button (2 loudspeakers), RCA (Record Line Out) -USB & SD Card maximum size: 16GB -Plays .mp3 files from USB drives and SD Cards -Digital fluorescent output display -Bass, treble and balance controls -Frequency Response: 20Hz-20KHz -110-220V Switchable-Weight: 4.5 lbs.

Chandler Limited Germanium Preamp/Di

The Germanium pre-amp design by Chandler Limited designer Wade Goeke uses classic germanium transistors in all class A, transformer-balanced circuits. The use of germanium devices opens a whole new sound palate not found in any pro audio equipment currently manufactured.These incredibly smooth-sounding transistors were the basis of the earliest transistor designs by Neve, EMI, Telefunken, and Fairchild. Those familiar with these units can attest to the special sound of the germanium transistor. The Germanium series runs on +40 volt power, high current, and has a huge +34 output before clipping. The sound is warm and smooth, as with many vintage style circuits, but you'll find a whole new world of smooth audio here as well as a sound that settles in perfectly to your tracks without fighting. Add these new circuits to Chandler's new transformer line that combines the best parts of Chandler's favorite trannies, St Ives and Gardners, into new great-sounding input and output transformers.Gain/Germainium DriveThis is your standard input gain control. It is a 10-position Elma switch with 3dB step increments. The full range of the unit is -5dB, with the pad, to +65dB, without the pad and Germanium Drive and Feeback at full. The actual amount of overall gain, however, is affected by feedback control. When the gain is at 0 and the feedback is at 0, the overall gain is +10dB. Increasing the feedback to 10 changes the overall gain to +40dB, with all the tonal changes described under the feedback control. Using different combinations of feedback and input gain is essential if you want to take advantage of all the tones available from the Germanium pre-amp.FeedbackThe Feedback control is essential to the sound and function of this pre-amp. Audio amplifiers incorporate some amount of negative feedback, which is where the output signal of the amplifier is fed back to its input. This affects the sound and function of the amplifier in many ways. THD, frequency response, gain, and amplifier stabilization change considerably with varying feedback. In use, you will find these results: When feedback is at 0 the unit will produce more high frequency information, less THD, less gain, and generally a more pristine, clear tone. Pushing the feedback higher will add THD, gain, a small bass rise, and a small high-end roll-off.Pad switchA 15dB Pad switch. Do not be afraid to use the pad on the unit as you will not find the adverse effects associated with many pads. The Pad is also very helpful with discovering all the tonal variations that the Germanium is capable of producing. Use the Pad when you are driving the Germanium very hard to keep the output levels in a usable range. Another important use for the Pad is to drop the gain to a line level while sending tape/disk tracks or line sources into the transformer-balanced rear input.Thick switchThe Thick switch adds a gentle low end rise to the signal. It sounds simple but all of Chandler's beta testers commented about this being their favorite part of the unit. One said, "Why don't you just wire it in permanently?" and, "It's great for making large, meaty guitars."VU MeterAn LED meter that functions in two ranges. The ranges are from -12 to +3 and +5 to +20dB. You can select the range with the pushbutton to the left of the meter.DI/Unbalanced InThis is an unbalanced input for guitar, bass, samples, etc. Simply throw the toggle switch and you're off.48-volt switching48 volt switches phantom power.PhaseReverses the polarity of the pre-amp's output.Special note about Thick switchIn some cases, when extremely high gain and feedback are used with transformerless microphones, you may get oscillation from the Germanium pre-amp. This is a very rare occasion, but Chandler thought it was worth mentioning. This was not compensated for in the final design for two reasons. First, any correction of this changed the sound of the pre-amp. Second, it happens in very rare instances when a combination of Gain, Feedback, Thi

PyleHome PT1100 1000 Watt Power Amplifier

1000 watts peak power. 450 watts @ 2 ohms. 360 watts @ 4 ohms. 200 watts @ 8 ohms. Inputs: RCA (4 audio sources). 1 RCA dedicated for record line output. Two Microphones Input Jacks. Master Volume Controls w/Blue LED. Heavy Duty Fan Cooling. A/B Speaker Selector. Removable rack-mount brackets. 3U Height w/ Remote. 110-220V Switchable. Dimensions: 19 W x 5.1 H x 12.1 D. Weight: 14.3 lbs (6.5 kg)